Friday, August 1, 2014
iPod Nano 5th generation disassembly Manual
Disassembly Guide for iPod Nano 5th generation. step-by-step instructions with photos. You better start from the side. (Be careful near the hold switch and earphone jack). It's easier if you use a soft tool to hold the gap open and then Wedge another there to work your way to the sides. There are several clips holding the frame in place so gently pry up and down while you are moving from one side to the other.
Once you have so you can proceed. The case is still attached by 2 ribbons at this point so do not attempt to remove the back yet. Remove the headphone and hold Switch cable use a flat tool to lift Brown tab shown and then you can easily remove the Orange cable. Remove the IDE cable from the HARD DRIVE to do this simply flip the Brown latch shown above above and you should be able to wiggle the cable free. Be careful that cables are delicate.
get here iPod Nano 5th generation disassembly Manual
